china faucet factory -- cross handle kitchen faucets with zinc materials

china faucet factory -- cross handle kitchen faucets with zinc materials

kitch faucets uphold the excellence of quality, durable coatings, anti-corrosion, water and energy conservation, 

and many styles for different kitchen design.

Sometimes we use the kitchen faucet in the process will find after the tap tightly closed or will leak, and at the 

outlet from the tapis leaking or joints. Found such a situation, how should we do it?

Three common kitchen leaking leaks and solutions:

1. the outlet leaking reason: it is because the axis washer inside the faucet wear due. Workaround: Use pliers to

   loosen and remove the gland tied to the axis of the clip pads removed, replaced with a new gasket to the axis.

   
   

2. the leading cause of leaking tied to lower gap: it is because inside the triangle gland seal wear caused. 

    Workaround: You can remove the screws loosen tie first, then loosen the gland removed, then the inside 

    of the triangular seal shop gland removed, replaced with new one.

3. took over the junction leakage: generally cap nut is loose, the solution: Then you can re-fasten the cap 

     nut or replaced with a new U-shaped gasket.