Everest
| Quantity: | |
|---|---|
| Plastic PPR pipe | |||||
| Norminal outside diameter(dn) | S5 | s4 | s3.2 | s2.5 | Packing(M/Bag) |
| Nominal wall thickness | |||||
| 20 | 2 | 2.3 | 2.8 | 3.4 | 180 |
| 25 | 2.3 | 2.8 | 3.5 | 4.2 | 140 |
| 32 | 2.9 | 3.6 | 4.4 | 5.4 | 80 |
| 10 | 3.7 | 4.5 | 5.5 | 6.7 | 60 |
| 50 | 4.6 | 5.6 | 6.9 | 8.3 | 40 |
| 63 | 5.8 | 7.1 | 8.6 | 10.5 | 24 |
| 75 | 6.8 | 8.4 | 10.3 | 12.5 | 16 |
| 90 | 8.2 | 10.1 | 12.3 | 15.0 | 12 |
| 110 | 10.0 | 12.3 | 15.1 | 18.3 | 8 |
| 160 | 17.7 | 21.9 | |||
| PPR platic fitting | |||||
| Equal Diameter Elbow | Equal Socket | Straight Tee | 45" Elbow | ||
| 20-160mm | 20-160mm | 20-160mm | 20-160mm | ||
| Reducing Coupling | Reducing-outlet tee | End cap | Reduced Elbow | ||
| 25-160mm | 25-160mm | 20-110mm | 25-32mm | ||
| Cross Bridge Bend | PPR Platic Union | Plug | Elamp | ||
| 20-31 | 20-32mm | 20-25mm | 20-63mm | ||
| Other | we can supply as customer reuiqred. | ||||
| PPR Platic fittings | |||||
| Female Socket | Male socket | Female Elbow | Male Elbow | ||
| 20mm-63mm | 20mm-63mm | 20mm-32mm | 20mm-32mm | ||
| Female tee | Male tee | PPR Female Brass Union | PPR Male Brass Union | ||
| 20mm-32mm | 20mm-32mm | 20mm-63mm | 20mm-63mm | ||
| Stop Valve | steel Ball Core Valve | Double live Ball Valve | Double Female Elbow | ||
| 20mm-110mm | 20-63mm | 20mm-63mm | 20mm | ||
| Seated Elbow | Stand Clamp | Double Hot Melt Union | Valve Set | ||
| 20mm-25mm | 20mm-63mm | 20mm-63mm | 25mm-32mm | ||
| PPR Male Ball Valve | PPR Female Ball Valve | water Heater Joint Tee | Water Heater Elbow | ||
| 20mm-32mm | 20mm-32mm | 20mm | 20mm | ||
| Water Heater Socket | PPR Radiator( straight) | PPR Radiator(Angle) | Hot Melt Machine | ||
| 20mm | 25mm-32mm | 25mm-32mm | 20mm-110mm | ||
| Other | we can supply as customer reuiqred. | ||||
Corrosion resistance: PPR pipes have a low corrosion rate in water environments or when exposed to weathering agents such as atmospheric oxygen and carbon dioxide. Compared with a steel pipe which corrodes roughly at 10-6~10-5mm/year in normal conditions, the corrosion rates of PPR pipes are between 10-11~10-9mm/year. The anticorrosive performance of products is good enough to make them last longer than metal materials under the same environmental condition.
Lightweight: The density of most plastic materials is usually lower than that of water, but the density of PPR is even less than half that of water. This not only makes transportation conditions better but also reduces the workload during laying and lifting operations.
Flexibility: Compared with metal pipes (such as iron/steel or copper), plastic pipe has good flexibility; it can be wrapped around corners without sharp angles or bends, which makes it easier to install.
High durability: Plastic pipe made of PPR material used for underground piping systems can last longer than steel mainlines in an under-ground environment due to its corrosion resistance, lightweight and flexibility features. Unlike common perception, plastic pipes do not easily break when bent too sharply at a small angle within 180 degrees.
The raw material of PPR pipe is Polypropylene Random Copolymer (PPR-C). The production of ppr pipe should comply with ISO 15874 standards. The PPR pipes designed for the distribution of hot and cold water.
Our main products:
kitchen faucet
bathroom faucet
Shower set
Faucet fitting
PPR Pipe
PVC pipe
PE pipe
Pipe Fitting
And etc.
Tangshan Henglin Company info:
We are a factory specialized in faucet & pipe products with 10 years of experience, offering a diverse range of products and customization services, including kitchen faucets, bathroom faucets, PPR Pipe, PVC pipe, PE pipe, fittings and more.
We offer customization services where you can choose materials, colors, styles, packaging box and product specifications to match your taste and budget.
Our commitment is to provide customers with excellent bathroom products and services while actively engaging in environmental and social responsibility initiatives.
Thank you for choosing Tangshan Henglin!
| Plastic PPR pipe | |||||
| Norminal outside diameter(dn) | S5 | s4 | s3.2 | s2.5 | Packing(M/Bag) |
| Nominal wall thickness | |||||
| 20 | 2 | 2.3 | 2.8 | 3.4 | 180 |
| 25 | 2.3 | 2.8 | 3.5 | 4.2 | 140 |
| 32 | 2.9 | 3.6 | 4.4 | 5.4 | 80 |
| 10 | 3.7 | 4.5 | 5.5 | 6.7 | 60 |
| 50 | 4.6 | 5.6 | 6.9 | 8.3 | 40 |
| 63 | 5.8 | 7.1 | 8.6 | 10.5 | 24 |
| 75 | 6.8 | 8.4 | 10.3 | 12.5 | 16 |
| 90 | 8.2 | 10.1 | 12.3 | 15.0 | 12 |
| 110 | 10.0 | 12.3 | 15.1 | 18.3 | 8 |
| 160 | 17.7 | 21.9 | |||
| PPR platic fitting | |||||
| Equal Diameter Elbow | Equal Socket | Straight Tee | 45" Elbow | ||
| 20-160mm | 20-160mm | 20-160mm | 20-160mm | ||
| Reducing Coupling | Reducing-outlet tee | End cap | Reduced Elbow | ||
| 25-160mm | 25-160mm | 20-110mm | 25-32mm | ||
| Cross Bridge Bend | PPR Platic Union | Plug | Elamp | ||
| 20-31 | 20-32mm | 20-25mm | 20-63mm | ||
| Other | we can supply as customer reuiqred. | ||||
| PPR Platic fittings | |||||
| Female Socket | Male socket | Female Elbow | Male Elbow | ||
| 20mm-63mm | 20mm-63mm | 20mm-32mm | 20mm-32mm | ||
| Female tee | Male tee | PPR Female Brass Union | PPR Male Brass Union | ||
| 20mm-32mm | 20mm-32mm | 20mm-63mm | 20mm-63mm | ||
| Stop Valve | steel Ball Core Valve | Double live Ball Valve | Double Female Elbow | ||
| 20mm-110mm | 20-63mm | 20mm-63mm | 20mm | ||
| Seated Elbow | Stand Clamp | Double Hot Melt Union | Valve Set | ||
| 20mm-25mm | 20mm-63mm | 20mm-63mm | 25mm-32mm | ||
| PPR Male Ball Valve | PPR Female Ball Valve | water Heater Joint Tee | Water Heater Elbow | ||
| 20mm-32mm | 20mm-32mm | 20mm | 20mm | ||
| Water Heater Socket | PPR Radiator( straight) | PPR Radiator(Angle) | Hot Melt Machine | ||
| 20mm | 25mm-32mm | 25mm-32mm | 20mm-110mm | ||
| Other | we can supply as customer reuiqred. | ||||
Corrosion resistance: PPR pipes have a low corrosion rate in water environments or when exposed to weathering agents such as atmospheric oxygen and carbon dioxide. Compared with a steel pipe which corrodes roughly at 10-6~10-5mm/year in normal conditions, the corrosion rates of PPR pipes are between 10-11~10-9mm/year. The anticorrosive performance of products is good enough to make them last longer than metal materials under the same environmental condition.
Lightweight: The density of most plastic materials is usually lower than that of water, but the density of PPR is even less than half that of water. This not only makes transportation conditions better but also reduces the workload during laying and lifting operations.
Flexibility: Compared with metal pipes (such as iron/steel or copper), plastic pipe has good flexibility; it can be wrapped around corners without sharp angles or bends, which makes it easier to install.
High durability: Plastic pipe made of PPR material used for underground piping systems can last longer than steel mainlines in an under-ground environment due to its corrosion resistance, lightweight and flexibility features. Unlike common perception, plastic pipes do not easily break when bent too sharply at a small angle within 180 degrees.
The raw material of PPR pipe is Polypropylene Random Copolymer (PPR-C). The production of ppr pipe should comply with ISO 15874 standards. The PPR pipes designed for the distribution of hot and cold water.
Our main products:
kitchen faucet
bathroom faucet
Shower set
Faucet fitting
PPR Pipe
PVC pipe
PE pipe
Pipe Fitting
And etc.
Tangshan Henglin Company info:
We are a factory specialized in faucet & pipe products with 10 years of experience, offering a diverse range of products and customization services, including kitchen faucets, bathroom faucets, PPR Pipe, PVC pipe, PE pipe, fittings and more.
We offer customization services where you can choose materials, colors, styles, packaging box and product specifications to match your taste and budget.
Our commitment is to provide customers with excellent bathroom products and services while actively engaging in environmental and social responsibility initiatives.
Thank you for choosing Tangshan Henglin!
